Product Description

Mechanical and Hydraulic Edge Dock Levelers for Loading Dock Efficiency

Edge dock levelers provide a dependable and space-saving solution for bridging the gap between loading docks and trailers during material handling operations. Designed for warehouses, distribution centers, manufacturing facilities, and shipping docks, these dock levelers improve loading efficiency while enhancing forklift access and operator safety. Their compact design mounts directly to the dock face without requiring a concrete recess, making installation faster and more economical than traditional pit-style dock levelers.  The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. The leveler comes complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping is twenty-nine (29) inches (29-13/16" with 30,000 lb. capacity) with a (36-5/8") long ramping length available for smaller grade on PP and PE series levelers. A steel dock edge, approach ramp, or approach plate is necessary on the dock face, and a continuous weld (completely across the top, and down both sides of the mounting plate) is required for proper installation. Additionally, the mounting plate must be bolted to the dock face, via the anchor holes provided on the mounting plate.

The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

The Manual Hydraulic Hand Pump system is used to lift the leveler and extend the lip. The operator actuates the lowering valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. Truck must pull out for leveler to return to stored position.

The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. 115V, 1-phase power standard. Unit comes complete with motor, pump, control box, cylinder, lines, and oil. Truck must pull out for leveler to return to stored position.

  • Easy install allows unit to quickly mount to any loading dock with a steel dock edge
  • Tread plate design offers a positive non-slip gripping action
  • Product design conveniently does not require a concrete recess
  • Solid steel construction offers long lasting reliable use

Everything You'll Need For Your Dock!

Loading Dock Lights

Dock Insulated Blanket

Wheel Chocks

Trailer Stabilizing Jacks

Specifications

Model Description Uniform Capacity (lb.) Service Range Above Dock (in.) Net Wt. (lb.)
FM-0648 Steel Mechanical Edge-O-Dock Leveler 48 In. Ramp Width 6,000 Lb. Capacity Brown 6,000 5 348
FM-2066 Steel Mechanical Edge-O-Dock Leveler 66 In. Ramp Width 20,000 Lb. Capacity Brown 20,000 5 514
FM-2072 Steel Mechanical Edge-O-Dock Leveler 72 In. Ramp Width 20,000 Lb. Capacity Brown 20,000 5 523
FM-2078 Steel Mechanical Edge-O-Dock Leveler 78 In. Ramp Width 20,000 Lb. Capacity Brown 20,000 5 560
FM-2566 Steel Mechanical Edge-O-Dock Leveler 66 In. Ramp Width 25,000 Lb. Capacity Brown 25,000 5 556
FM-2572 Steel Mechanical Edge-O-Dock Leveler 72 In. Ramp Width 25,000 Lb. Capacity Brown 25,000 5 585
FM-3066 Steel Mechanical Edge-O-Dock Leveler 66 In. Ramp Width 30,000 Lb. Capacity Brown 30,000 5 663
FM-3072 Steel Mechanical Edge-O-Dock Leveler 72 In. Ramp Width 30,000 Lb. Capacity Brown 30,000 5 709
PE-1572-36 Steel Electric Edge-O-Dock Leveler 26-3/4 In. x 98 In. x 27-1/2 In. 15,000 Lb. Capacity Brown 15,000 5 749
PE-2066 Steel Electric Edge-O-Dock Leveler 17-1/2 In. x 93 In. x 27-1/2 In. 20,000 Lb. Capacity Brown 20,000 5 581
PE-2072 Steel Electric Edge-O-Dock Leveler 17-1/2 In. x 99 In. x 27-1/2 In. 20,000 Lb. Capacity Brown 20,000 5 601
PE-2078 Steel Electric Edge-O-Dock Leveler 17-1/2 In. x 105 In. x 27-1/2 In. 20,000 Lb. Capacity Brown 20,000 5 567
PE-2566 Steel Electric Edge-O-Dock Leveler 17-1/2 In. x 93 In. x 27-1/2 In. 25,000 Lb. Capacity Brown 25,000 5 619
PE-2572 Steel Electric Edge-O-Dock Leveler 17-1/2 In. x 99 In. x 27-1/2 In. 25,000 Lb. Capacity Brown 25,000 5 649
PE-2572-36 Steel Electric Edge-O-Dock Leveler 26-3/4 In. x 98 In. x 27-1/2 In. 25,000 Lb. Capacity Brown 25,000 5 826
PE-3066 Steel Electric Edge-O-Dock Leveler 17-1/2 In. x 93 In. x 27-1/2 In. 30,000 Lb. Capacity Brown 30,000 5 745
PE-3072 Steel Electric Edge-O-Dock Leveler 17-1/2 In. x 99 In. x 27-1/2 In. 30,000 Lb. Capacity Brown 30,000 5 782
PP-1572-36 Steel Hand Pump Edge-O-Dock Leveler 72 In. Ramp Width x 36-5/8 In. Ramp Length 15,000 Lb. Capacity Brown 15,000 5 743
PP-2066 Steel Hand Pump Edge-O-Dock Leveler 66 In. Ramp Width x 29 In. Ramp Length 20,000 Lb. Capacity Brown 20,000 5 542
PP-2072 Steel Hand Pump Edge-O-Dock Leveler 72 In. Ramp Width x 29 In. Ramp Length 20,000 Lb. Capacity Brown 20,000 5 566
PP-2078 Steel Hand Pump Edge-O-Dock Leveler 78 In. Ramp Width x 29 In. Ramp Length 20,000 Lb. Capacity Brown 20,000 5 578
PP-2566 Steel Hand Pump Edge-O-Dock Leveler 66 In. Ramp Width x 29 In. Ramp Length 25,000 Lb. Capacity Brown 25,000 5 600
PP-2572 Steel Hand Pump Edge-O-Dock Leveler 72 In. Ramp Width x 29 In. Ramp Length 25,000 Lb. Capacity Brown 25,000 5 615
PP-2572-36 Steel Hand Pump Edge-O-Dock Leveler 72 In. Ramp Width x 36-5/8 In. Ramp Length 25,000 Lb. Capacity Brown 25,000 5 780
PP-3066 Steel Hand Pump Edge-O-Dock Leveler 66 In. Ramp Width x 29-13/16 In. Ramp Length 30,000 Lb. Capacity Brown 30,000 5 699
PP-3072 Steel Hand Pump Edge-O-Dock Leveler 72 In. Ramp Width x 29-13/16 In. Ramp Length 30,000 Lb. Capacity Brown 30,000 5 725

Options & Accessories

Videos

Questions & Answers

Q: What is the diameter of the FM-BAR used with edge o dock leveler?
A: The diameter of the FM-BAR is approximately 1-5/16".

Q: What are the AMPS for the Edge O Dock Levelers? We need a 115V.
A: The PE Edge-O-Dock Levelers with a 115V use 12 AMPS.

Q: How many pumps would it take to raise to full height on the PP-2072?
A: It would take approximately 25 strokes.

Q: What is the overall length of the actuation bar?
A: The overall length of the FM-BAR is 41".

Q: Which approach ramp works with the edge of dock RAMP-2 OR RAMP-4 ?
A: Both ramps work with the edge-o-dock.

Q: What is the gauge and thickness of the steel, please?
A: The lip, mid plate, and back plate are all 3/8" for Models FM/PE/PP 20,000 lb. capacity.

Q: What is the gauge and thickness of the steel, please?
A: The lip and mid plate are 1/2". The back plate is 3/8" for models FM/PE/PP 25,000 lb. capacity.

Q: What is the gauge and thickness of the steel, please?
A: Models FM/PE/PP 30,000 lb. capacity the lip, mid plate and back plate are all 1/2".

Documentation

Owner's Manuals (3)
Approval Drawings (32)
Survey Sheets (1)
Testing Certificates (38)
Label Page PDFs (3)
SDS Sheets (1)

Complementary products

    Customers also bought

      • FREE SHIPPING

        On every order

      • 30-DAY RETURNS

      • PREMIUM CUSTOMER SUPPORT

        Connect with us through email or phone

      • SECURE ENCRYPTED PAYMENTS

        We utilize advanced encryption 

        to ensure there is never an issue with your privacy.